The FLEXY Laserweldingsystem is especially developed to weld big, heavy and unregular Surfaces direct by the Part. For Workpices 1000x1000 mm.
The laser is conveyed by the generator to the fiber optic emitter, supported by a mechanical arm that moves at weightlessly so that the operator can position it manually and guide it with extreme ease along the edges to be repaired.
The high power is adjustable from 0 to 200 Joules, so that wire filler even 1 mm in diameter can be used, and in the same amount of time at low power, to finish very small zones on very large, expensive dies.
TECHNICAL SPECIFICATIONS :
|LASER SOURCE AND WAVE LENGTH||Nd: YAG 1064 nm X2|
|AVERAGE POWER||150 W|
|PEAK POWER||15 kW|
|ENERGY||0,1 to 200 J|
|IMPULSE TIME||0,1 to 20 ms|
|PULSE FREQUENCY||0,5 to 30 Hz|
|SPOT DIAMETER||0,6 to 2,0 mm|
|SPOT SETTING||Motorized, 15 positions|
|WAVE PROGRAMS||Pulse Shaping 6 preset|
|MEMORIES CELL STORED||100|
|CONTROL JOYSTICK||On Board|
|EXTERNAL CONTROL||Color Touch Screen|
|INPUT POWER||230 V AC, 50/60 Hz, single phase|
|MAX DIMENSIONS [WXDXH]||50x50x80 cm|
|MAX EXTENSION MANUAL ARM||1200 mm|
|ARGON / AIR NOZZLE||Yes / Yes|